Features of your 10" Westcoast-Mxtbars RG15
Top Crossbar: - 5 1/2" spread in the middle of the handlebar. Then bends and rises up 2" and then the 1-1/4" tubing is swaged (tapered) down to 1"diameter. (Fits conventional controls) - Both sides have 1/2" holes punched for internal wiring. - Cross width is 31 1/2" across and pullback is 3 1/2". - Your Wrist angle will be at a 18 degree angle Cross bar is welded to sit flat on a 28 degree rake - The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers. The throttle side tubing at 1" is honed out and notched for fly by wire. Risers: 3 1/2" spacing between risers. (Fits conventional top triple tree clamps). 1/2" x 5/8" oval holes are 1 7/8" up from the bottom for internal wiring. Recommendations: - Heavy Duty Bushings FOR ROAD GLIDE - Grade 8 or Grade 9 (L9) bolts Keynote: - These Handlebars are measured by overall height 8 inch risers with the 2 inch rise on the top cross bar equals 10 inches. - 4 total weld points
