Home > TBARS > SBOB TBARS > 8 INCH
Sort By:
Page of 1
8 inch SBOB TBARS RAW
Our Price: $225.00
Features of your Westcoast-Tbars 8" Risers SBOB

Metal: 1080 mild gauge steel tubing
Coating: POWDERCOAT
Color: BLACK
Internal wiring: YES

Top Crossbar: 1 1/4" swaged (tapered) down to 1"diameter. (Fits conventional controls) - Cross width is 28" across and pullback is 2 1/2". - Your Wrist angle will be at a 16 degree angle Cross bar is welded to sit flat on a 28 degree rake - The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.

Risers:
- All cuts and holes are made by Laser cutting - 3 1/2" spacing between risers. - 1 1/4" at the top of the riser swaged (tapered) down to 1" diameter. Original SBOB

Steel plate:
1/2" thick steel plate - The risers are pressed through the the plate at a 14 degree angle and TIG welded at the top of the plate and the bottom of the plate.
Recommendations: - Grade 8 or Grade 9 (L9) bolts

Keynote:
Risers are 8" tall and the top cross bar is welded on top of riser tubes. 9" overall including top crossbar. - 6 total weld points - YOUR STOCK SBOB CABLES AND WIRING WILL SWAP OVER WITHOUT HAVING TO CHANGE ANY WIRING OR CABLES.
This SBOB model is specifically made for the 2008-2012 street bob HD made with the Integrated Triple Trees. If you have a 2007 and earlier or a 2013 and later then please go back and choose the standard Tbars.
Features of your Westcoast-Tbars 8" Risers SBOB

Metal: 1080 mild gauge steel tubing
Coating: Raw Metal
Color: N/A
Internal wiring: YES

Top Crossbar: 1 1/4" swaged (tapered) down to 1"diameter. (Fits conventional controls) - Cross width is 28" across and pullback is 2 1/2". - Your Wrist angle will be at a 16 degree angle Cross bar is welded to sit flat on a 28 degree rake - The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.

Risers:
- All cuts and holes are made by Laser cutting - 3 1/2" spacing between risers. - 1 1/4" at the top of the riser swaged (tapered) down to 1" diameter. Original SBOB

Steel plate:
1/2" thick steel plate - The risers are pressed through the the plate at a 14 degree angle and TIG welded at the top of the plate and the bottom of the plate.
Recommendations: - Grade 8 or Grade 9 (L9) bolts

Keynote:
Risers are 8" tall and the top cross bar is welded on top of riser tubes. 9" overall including top crossbar. - 6 total weld points - YOUR STOCK SBOB CABLES AND WIRING WILL SWAP OVER WITHOUT HAVING TO CHANGE ANY WIRING OR CABLES.
This SBOB model is specifically made for the 2008-2012 street bob HD made with the Integrated Triple Trees. If you have a 2007 and earlier or a 2013 and later then please go back and choose the standard Tbars.