Features of your Westcoast-Tbars 12" Risers SBOB
Metal: 1080 mild gauge steel tubing
Coating: POWDERCOAT
Color: BLACK
Internal wiring: YES
Top Crossbar: 1 1/4" swaged (tapered) down to 1"diameter. (Fits conventional controls)
- Cross width is 28" across and pullback is 2 1/2".
- Your Wrist angle will be at a 16 degree angle Cross bar is welded to sit flat on a 28 degree rake
- The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.
Risers:
- All cuts and holes are made by Laser cutting
- 3 1/2" spacing between risers.
- 1 1/4" at the top of the riser swaged (tapered) down to 1" diameter.
Original SBOB
Steel plate: 1/2" thick steel plate
- The risers are pressed through the the plate at a 14 degree angle and
TIG welded at the top of the plate and the bottom of the plate.
Recommendations:
- Grade 8 or Grade 9 (L9) bolts
Keynote: Risers are 12" tall and the top cross bar is welded on top of riser tubes. 13" overall including top crossbar.
- 6 total weld points
- YOUR STOCK SBOB CABLES AND WIRING WILL SWAP OVER WITHOUT HAVING TO CHANGE ANY WIRING OR CABLES.
This SBOB model is specifically made for the 2008-2012 street bob HD
made with the Integrated Triple Trees. If you have a 2007 and earlier or
a 2013 and later then please go back and choose the standard Tbars.
|
Features of your Westcoast-Tbars 12" Risers SBOB
Metal: 1080 mild gauge steel tubing
Coating: Raw Metal
Color: N/A
Internal wiring: YES
Top Crossbar: 1 1/4" swaged (tapered) down to 1"diameter. (Fits conventional controls)
- Cross width is 28" across and pullback is 2 1/2".
- Your Wrist angle will be at a 16 degree angle Cross bar is welded to sit flat on a 28 degree rake
- The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.
Risers:
- All cuts and holes are made by Laser cutting
- 3 1/2" spacing between risers.
- 1 1/4" at the top of the riser swaged (tapered) down to 1" diameter.
Original SBOB
Steel plate: 1/2" thick steel plate
- The risers are pressed through the the plate at a 14 degree angle and
TIG welded at the top of the plate and the bottom of the plate.
Recommendations:
- Grade 8 or Grade 9 (L9) bolts
Keynote: Risers are 12" tall and the top cross bar is welded on top of riser tubes. 13" overall including top crossbar.
- 6 total weld points
- YOUR STOCK SBOB CABLES AND WIRING WILL SWAP OVER WITHOUT HAVING TO CHANGE ANY WIRING OR CABLES.
This SBOB model is specifically made for the 2008-2012 street bob HD
made with the Integrated Triple Trees. If you have a 2007 and earlier or
a 2013 and later then please go back and choose the standard Tbars.
|
