Home > TBARS > TBARS 2015/16 RG
Choose a section for your bike:
10 INCH 12 INCH 14 INCH
16 INCH
Sort By:
Page of 1
10 inch Westcoast-Tbars RAW (RG15)

Features of your Westcoast-Tbars 10" Risers RG15

Fitment:
* 2015-18 ROAD GLIDES
for 2014 and earlier bikes see TBARS Category

* 2018 and earlier STREET GLIDES


VERY IMPORTANT: ABS and NON ABS Road glides can use these bars with the current stock cables and wiring.


Metal:
1080 mild gauge steel tubing with .125 wall thickness

Coating: RAW Color: N/A

Top Crossbar: 1 1/4" swaged (tapered) down to 1" diameter. Both sides have 1/2" holes punched for internal wiring. (Fits conventional controls) - Cross width is 28" across and has a 2 1/4" pullback. The throttle side tubing at 1" is honed out and notched for fly by wire The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.

Risers: 3 1/2" spacing between risers. (Fits 2015 top triple tree clamps). 1/2" x 5/8" oval holes are 1 7/8" up from the bottom for internal wiring.

Recommendations:
- Heavy Duty Bushings FOR ROAD GLIDES.
- Grade 8 or Grade 9 (L9) bolts

Keynote: Risers are 10" tall and the top cross bar is welded on top of riser tubes. 11" overall including top crossbar. - 4 total weld points. 2 holes will need to be made in the nacelle plastic to pass through and bolt down directly to the triple trees. On road glides the nipple on the underside of the vibration dampener on the inside part of the controls must be cut off to fit on our bars.

Here is RG15 Nacelle Cutout template link.CLICK HERE TO DOWNLOAD!

Our Price: $235.00
12 inch Westcoast-Tbars RAW (RG15)

Features of your Westcoast-Tbars 12" Risers RG15

Fitment:
* 2015-18 ROAD GLIDES
for 2014 and earlier bikes see TBARS Category

* 2018 and earlier STREET GLIDES


VERY IMPORTANT: ABS and NON ABS Road glides can use these bars with the current stock cables and wiring.

Metal: 1080 mild gauge steel tubing with .125 wall thickness

Coating: RAW Color: N/A

Top Crossbar: 1 1/4" swaged (tapered) down to 1" diameter. Both sides have 1/2" holes punched for internal wiring. (Fits conventional controls) - Cross width is 28" across and has a 2 1/4" pullback. The throttle side tubing at 1" is honed out and notched for fly by wire The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.

Risers: 3 1/2" spacing between risers. (Fits 2015 top triple tree clamps). 1/2" x 5/8" oval holes are 1 7/8" up from the bottom for internal wiring.

Recommendations:
- Heavy Duty Bushings
- Grade 8 or Grade 9 (L9) bolts

Keynote: Risers are 12" tall and the top cross bar is welded on top of riser tubes. 13" overall including top crossbar. - 4 total weld points. 2 holes will need to be made in the nacelle plastic to pass through and bolt down directly to the triple trees. On road glides the nipple on the underside of the vibration dampener on the inside part of the controls must be cut off to fit on our bars.

Here is RG15 Nacelle Cutout template link.CLICK HERE TO DOWNLOAD!

Our Price: $240.00
14 inch Westcoast-Tbars RAW (RG15)

Features of your Westcoast-Tbars 14" Risers RG15

Fitment:
* 2015-18 ROAD GLIDES
for 2014 and earlier bikes see TBARS Category

* 2018 and earlier STREET GLIDES


VERY IMPORTANT:
IF YOU HAVE ABS. YOU WILL BE ABLE TO SWAP YOUR CURRENT CABLES AND WIRING TO THESE.
IF YOUR BIKE DO NOT HAVE ABS. YOU WILL NEED TO EXTEND YOUR CABLES AND WIRING OR GO DOWN A SIZE TO 12".

Metal: 1080 mild gauge steel tubing with .125 wall thickness

Coating: RAW

Top Crossbar: 1 1/4" swaged (tapered) down to 1" diameter. Both sides have 1/2" holes punched for internal wiring. (Fits conventional controls) - Cross width is 28" across and has a 2 1/4" pullback. The throttle side tubing at 1" is honed out and notched for fly by wire The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.

Risers: 3 1/2" spacing between risers. (Fits 2015 top triple tree clamps). 1/2" x 5/8" oval holes are 1 7/8" up from the bottom for internal wiring.

Recommendations:
- Heavy Duty Bushings for Road glides
- Grade 8 or Grade 9 (L9) bolts

Keynote: Risers are 14" tall and the top cross bar is welded on top of riser tubes. 15" overall including top crossbar. - 4 total weld points. 2 holes will need to be made in the nacelle plastic to pass through and bolt down directly to the triple trees. On road glides the nipple on the underside of the vibration dampener on the inside part of the controls must be cut off to fit on our bars.

Here is RG15 Nacelle Cutout template link.CLICK HERE TO DOWNLOAD!

Our Price: $245.00
16 inch Westcoast-Tbars RAW (RG15)

Features of your Westcoast-Tbars 16" Risers RG15

Fitment:
* 2015-18 ROAD GLIDES
for 2014 and earlier bikes see TBARS Category

* 2018 and earlier STREET GLIDES


VERY IMPORTANT: Cable and wiring extensions will be needed for this size.


Metal: 1080 mild gauge steel tubing with .125 wall thickness

Coating: RAW

Top Crossbar: 1 1/4" swaged (tapered) down to 1" diameter. Both sides have 1/2" holes punched for internal wiring. (Fits conventional controls) - Cross width is 28" across and has a 2 1/4" pullback. The throttle side tubing at 1" is honed out and notched for fly by wire The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.

Risers: 3 1/2" spacing between risers. (Fits 2015 top triple tree clamps). 1/2" x 5/8" oval holes are 1 7/8" up from the bottom for internal wiring.

Recommendations:
- Heavy Duty Bushings for Road glides
- Grade 8 bolts

Keynote: Risers are 16" tall and the top cross bar is welded on top of riser tubes. 17" overall including top crossbar. - 4 total weld points. 2 holes will need to be made in the nacelle plastic to pass through and bolt down directly to the triple trees. On road glides the nipple on the underside of the vibration dampener on the inside part of the controls must be cut off to fit on our bars.

Here is RG15 Nacelle Cutout template link.CLICK HERE TO DOWNLOAD!

Our Price: $245.00
10 inch Westcoast-Tbars POWDERCOAT BLACK (RG15)

Features of your Westcoast-Tbars 10" Risers RG15

Fitment:
* 2015-18 ROAD GLIDES
for 2014 and earlier bikes see TBARS Category

* 2018 and earlier STREET GLIDES


VERY IMPORTANT: ABS and NON ABS Road glides can use these bars with the current stock cables and wiring.

Metal: 1080 mild gauge steel tubing with .125 wall thickness

Coating: POWDERCOATED Color: BLACK

Top Crossbar: 1 1/4" swaged (tapered) down to 1" diameter. Both sides have 1/2" holes punched for internal wiring. (Fits conventional controls) - Cross width is 28" across and has a 2 1/4" pullback. The throttle side tubing at 1" is honed out and notched for fly by wire. The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.

Risers: 3 1/2" spacing between risers. (Fits 2015 top triple tree clamps). 1/2" x 5/8" oval holes are 1 7/8" up from the bottom for internal wiring.

Recommendations:
- Heavy Duty Bushings
- Grade 8 or Grade 9 (L9) bolts

Keynote: Risers are 10" tall and the top cross bar is welded on top of riser tubes. 11" overall including top crossbar. - 4 total weld points. 2 holes will need to be made in the nacelle plastic to pass through and bolt down directly to the triple trees. On road glides the nipple on the underside of the vibration dampener on the inside part of the controls must be cut off to fit on our bars.

RG15 Nacelle Cutout template link.CLICK HERE TO DOWNLOAD!

Our Price: $280.00
12 inch Westcoast-Tbars POWDERCOAT BLACK (RG15)

Features of your Westcoast-Tbars 12" Risers RG15

Fitment:
* 2015-18 ROAD GLIDES
for 2014 and earlier bikes see TBARS Category

* 2018 and earlier STREET GLIDES


VERY IMPORTANT: ABS and NON ABS Road glides can use these bars with the current stock cables and wiring.


Metal: 1080 mild gauge steel tubing with .125 wall thickness

Coating: POWDERCOATED Color: BLACK

Top Crossbar: 1 1/4" swaged (tapered) down to 1" diameter. Both sides have 1/2" holes punched for internal wiring. (Fits conventional controls) - Cross width is 28" across and has a 2 1/4" pullback. The throttle side tubing at 1" is honed out and notched for fly by wire The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.

Risers: 3 1/2" spacing between risers. (Fits 2015 top triple tree clamps). 1/2" x 5/8" oval holes are 1 7/8" up from the bottom for internal wiring.

Recommendations:
- Heavy Duty Bushings
- Grade 8 or Grade 9 (L9) bolts

Keynote: Risers are 12" tall and the top cross bar is welded on top of riser tubes. 13" overall including top crossbar. - 4 total weld points. 2 holes will need to be made in the nacelle plastic to pass through and bolt down directly to the triple trees. On road glides the nipple on the underside of the vibration dampener on the inside part of the controls must be cut off to fit on our bars.

Here is RG15 Nacelle Cutout template link.CLICK HERE TO DOWNLOAD! VERY IMPORTANT: ABS and NON ABS Road glides can use these bars with the current stock cables and wiring.

Our Price: $285.00
14 inch Westcoast-Tbars POWDERCOAT BLACK (RG15)

Features of your Westcoast-Tbars 14" Risers RG15

Fitment:
* 2015-18 ROAD GLIDES
for 2014 and earlier bikes see TBARS Category

* 2018 and earlier STREET GLIDES


VERY IMPORTANT:
IF YOU HAVE ABS. YOU WILL BE ABLE TO SWAP YOUR CURRENT CABLES AND WIRING TO THESE.
IF YOUR BIKE DO NOT HAVE ABS. YOU WILL NEED TO EXTEND YOUR CABLES AND WIRING OR GO DOWN A SIZE TO 12".

Metal: 1080 mild gauge steel tubing with .125 wall thickness

Coating: POWDERCOAT BLACK

Top Crossbar: 1 1/4" swaged (tapered) down to 1" diameter. Both sides have 1/2" holes punched for internal wiring. (Fits conventional controls) - Cross width is 28" across and has a 2 1/4" pullback. The throttle side tubing at 1" is honed out and notched for fly by wire The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.

Risers: 3 1/2" spacing between risers. (Fits 2015 top triple tree clamps). 1/2" x 5/8" oval holes are 1 7/8" up from the bottom for internal wiring.

Recommendations:
- Heavy Duty Bushings for Road glides
- Grade 8 or Grade 9 (L9) bolts

Keynote: Risers are 14" tall and the top cross bar is welded on top of riser tubes. 15" overall including top crossbar. - 4 total weld points. 2 holes will need to be made in the nacelle plastic to pass through and bolt down directly to the triple trees. On road glides the nipple on the underside of the vibration dampener on the inside part of the controls must be cut off to fit on our bars.

Here is RG15 Nacelle Cutout template link.CLICK HERE TO DOWNLOAD!

Our Price: $290.00
16 inch Westcoast-Tbars POWDERCOAT BLACK (RG15)

Features of your Westcoast-Tbars 16" Risers RG15

Fitment:
* 2015-18 ROAD GLIDES
for 2014 and earlier bikes see TBARS Category

* 2018 and earlier STREET GLIDES


VERY IMPORTANT: Cable and wiring extensions will be needed for this size

Metal: 1080 mild gauge steel tubing with .125 wall thickness

Coating: POWDERCOAT BLACK

Top Crossbar: 1 1/4" swaged (tapered) down to 1" diameter. Both sides have 1/2" holes punched for internal wiring. (Fits conventional controls) - Cross width is 28" across and has a 2 1/4" pullback. The throttle side tubing at 1" is honed out and notched for fly by wire The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.

Risers: 3 1/2" spacing between risers. (Fits 2015 top triple tree clamps). 1/2" x 5/8" oval holes are 1 7/8" up from the bottom for internal wiring.

Recommendations:
- Heavy Duty Bushings for Road glides
- Grade 8 bolts

Keynote: Risers are 16" tall and the top cross bar is welded on top of riser tubes. 17" overall including top crossbar. - 4 total weld points. 2 holes will need to be made in the nacelle plastic to pass through and bolt down directly to the triple trees. On road glides the nipple on the underside of the vibration dampener on the inside part of the controls must be cut off to fit on our bars.

Here is RG15 Nacelle Cutout template link.CLICK HERE TO DOWNLOAD!

Our Price: $290.00
10 inch Westcoast-Tbars CHROME (RG15)

Features of your Westcoast-Tbars 10" Risers RG15

Fitment:
* 2015-18 ROAD GLIDES
for 2014 and earlier bikes see TBARS Category

* 2018 and earlier STREET GLIDES


VERY IMPORTANT: ABS and NON ABS Road glides can use these bars with the current stock cables and wiring.

Metal: 1080 mild gauge steel tubing with .125 wall thickness

Coating: CHROME Color: n/a

Top Crossbar: 1 1/4" swaged (tapered) down to 1" diameter. Both sides have 1/2" holes punched for internal wiring. (Fits conventional controls) - Cross width is 28" across and has a 2 1/4" pullback. The throttle side tubing at 1" is honed out and notched for fly by wire The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.

Risers: 3 1/2" spacing between risers. (Fits 2015 top triple tree clamps). 1/2" x 5/8" oval holes are 1 7/8" up from the bottom for internal wiring.

Recommendations:
- Grade 8 only. grade 9 bolts will not work correctly

Keynote: Risers are 10" tall and the top cross bar is welded on top of riser tubes. 11" overall including top crossbar. - 4 total weld points. 2 holes will need to be made in the nacelle plastic to pass through and bolt down directly to the triple trees. On road glides the nipple on the underside of the vibration dampener on the inside part of the controls must be cut off to fit on our bars.

Here is RG15 Nacelle Cutout template link.CLICK HERE TO DOWNLOAD!

Our Price: $305.00
12 inch Westcoast-Tbars CHROME (RG15)

Features of your Westcoast-Tbars 12" Risers RG15

Fitment:
* 2015-18 ROAD GLIDES
for 2014 and earlier bikes see TBARS Category

* 2018 and earlier STREET GLIDES


VERY IMPORTANT: ABS and NON ABS Road glides can use these bars with the current stock cables and wiring.


Metal: 1080 mild gauge steel tubing with .125 wall thickness

Coating: Chrome

Top Crossbar: 1 1/4" swaged (tapered) down to 1" diameter. Both sides have 1/2" holes punched for internal wiring. (Fits conventional controls) - Cross width is 28" across and has a 2 1/4" pullback. The throttle side tubing at 1" is honed out and notched for fly by wire The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.

Risers: 3 1/2" spacing between risers. (Fits 2015 top triple tree clamps). 1/2" x 5/8" oval holes are 1 7/8" up from the bottom for internal wiring.

Recommendations:
- Heavy Duty Bushings
- Grade 8 or Grade 9 (L9) bolts

Keynote: Risers are 12" tall and the top cross bar is welded on top of riser tubes. 13" overall including top crossbar. - 4 total weld points. 2 holes will need to be made in the nacelle plastic to pass through and bolt down directly to the triple trees. On road glides the nipple on the underside of the vibration dampener on the inside part of the controls must be cut off to fit on our bars.

Here is RG15 Nacelle Cutout template link.CLICK HERE TO DOWNLOAD!

Our Price: $310.00
14 inch Westcoast-Tbars CHROME (RG15)

Features of your Westcoast-Tbars 14" Risers RG15

Fitment:
* 2015-18 ROAD GLIDES
for 2014 and earlier bikes see TBARS Category

* 2018 and earlier STREET GLIDES


VERY IMPORTANT:
IF YOU HAVE ABS. YOU WILL BE ABLE TO SWAP YOUR CURRENT CABLES AND WIRING TO THESE.
IF YOUR BIKE DO NOT HAVE ABS. YOU WILL NEED TO EXTEND YOUR CABLES AND WIRING OR GO DOWN A SIZE TO 12".

Metal: 1080 mild gauge steel tubing with .125 wall thickness

Coating: CHROME

Top Crossbar: 1 1/4" swaged (tapered) down to 1" diameter. Both sides have 1/2" holes punched for internal wiring. (Fits conventional controls) - Cross width is 28" across and has a 2 1/4" pullback. The throttle side tubing at 1" is honed out and notched for fly by wire The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.

Risers: 3 1/2" spacing between risers. (Fits 2015 top triple tree clamps). 1/2" x 5/8" oval holes are 1 7/8" up from the bottom for internal wiring.

Recommendations:
- Heavy Duty Bushings for Road glides
- Grade 8 or Grade 9 (L9) bolts

Keynote: Risers are 14" tall and the top cross bar is welded on top of riser tubes. 15" overall including top crossbar. - 4 total weld points. 2 holes will need to be made in the nacelle plastic to pass through and bolt down directly to the triple trees. On road glides the nipple on the underside of the vibration dampener on the inside part of the controls must be cut off to fit on our bars.

Here is RG15 Nacelle Cutout template link.CLICK HERE TO DOWNLOAD!

Our Price: $315.00
16 inch Westcoast-Tbars CHROME (RG15)

Features of your Westcoast-Tbars 16" Risers RG15

Fitment:
* 2015-18 ROAD GLIDES
for 2014 and earlier bikes see TBARS Category

* 2018 and earlier STREET GLIDES


VERY IMPORTANT: Cable and wiring extensions will be needed for this size.

Metal: 1080 mild gauge steel tubing with .125 wall thickness

Coating: CHROME

Top Crossbar: 1 1/4" swaged (tapered) down to 1" diameter. Both sides have 1/2" holes punched for internal wiring. (Fits conventional controls) - Cross width is 28" across and has a 2 1/4" pullback. The throttle side tubing at 1" is honed out and notched for fly by wire The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.

Risers: 3 1/2" spacing between risers. (Fits 2015 top triple tree clamps). 1/2" x 5/8" oval holes are 1 7/8" up from the bottom for internal wiring.

Recommendations:
- Heavy Duty Bushings for Road glides
- Grade 8 bolts

Keynote: Risers are 16" tall and the top cross bar is welded on top of riser tubes. 17" overall including top crossbar. - 4 total weld points. 2 holes will need to be made in the nacelle plastic to pass through and bolt down directly to the triple trees. On road glides the nipple on the underside of the vibration dampener on the inside part of the controls must be cut off to fit on our bars.

Here is RG15 Nacelle Cutout template link.CLICK HERE TO DOWNLOAD!

Our Price: $315.00