Home > MXTBARS > MXTBARS 2015/16 RG > 16 INCH
Sort By:
Page of 1
16 inch MX-TBARS RAW (RG15)

Features of your 16" Westcoast-Mxtbars RG15

Fitment:
* 2015-18 ROAD GLIDES
for
2014 and earlier bikes see MX-TBARS Category
* 2018 and earlier STREET GLIDES


VERY IMPORTANT: Cable and wiring extensions will be needed for this size.

Coating: RAW


Top Crossbar:
- 5 1/2" spread in the middle of the handlebar. Then bends and rises up 2" and then the 1-1/4" tubing is swaged (tapered) down to 1"diameter. (Fits conventional controls)
-
Both sides have 1/2" holes punched for internal wiring.
- Cross width is 31 1/2" across and pullback is 3 1/2".
- Your Wrist angle will be at a 18 degree angle Cross bar is welded to sit flat on a 28 degree rake
- The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.

The throttle side tubing at 1" is honed out and notched for fly by wire.

Risers:
3 1/2" spacing between risers. (Fits conventional top triple tree clamps). 1/2" x 5/8" oval holes are 1 7/8" up from the bottom for internal wiring.

Recommendations:
- Heavy Duty Bushings FOR ROAD GLIDE
- Grade 8 bolts
Keynote:
- These Handlebars are measured by overall height 14 inch risers with the 2 inch rise on the top cross bar equals 16 inches.
- 4 total weld points

- 2 holes will need to be made in the nacelle plastic to pass through and bolt down directly to the triple trees.
- On road glides the nipple on the underside of the vibration dampener on the inside part of the controls must be cut off to fit on our bars.

Here is RG15 Nacelle Cutout template link.CLICK HERE TO DOWNLOAD!

Our Price: $250.00
16 inch MX-TBARS POWDERCOAT BLACK (RG15)

Features of your 16" Westcoast-Mxtbars RG15


Fitment:
* 2015-18 ROAD GLIDES
for
2014 and earlier bikes see MX-TBARS Category
* 2018 and earlier STREET GLIDES


VERY IMPORTANT: Cable and wiring extensions will be needed for this size.

Coating: POWDERCOAT BLACK


Top Crossbar:
- 5 1/2" spread in the middle of the handlebar. Then bends and rises up 2" and then the 1-1/4" tubing is swaged (tapered) down to 1"diameter. (Fits conventional controls)
-
Both sides have 1/2" holes punched for internal wiring.
- Cross width is 31 1/2" across and pullback is 3 1/2".
- Your Wrist angle will be at a 18 degree angle Cross bar is welded to sit flat on a 28 degree rake
- The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.

The throttle side tubing at 1" is honed out and notched for fly by wire.

Risers:
3 1/2" spacing between risers. (Fits conventional top triple tree clamps). 1/2" x 5/8" oval holes are 1 7/8" up from the bottom for internal wiring.

Recommendations:
- Heavy Duty Bushings FOR ROAD GLIDE
- Grade 8 bolts
Keynote:
- These Handlebars are measured by overall height 14 inch risers with the 2 inch rise on the top cross bar equals 16 inches.
- 4 total weld points

- 2 holes will need to be made in the nacelle plastic to pass through and bolt down directly to the triple trees.
- On road glides the nipple on the underside of the vibration dampener on the inside part of the controls must be cut off to fit on our bars.

Here is RG15 Nacelle Cutout template link.CLICK HERE TO DOWNLOAD!

Our Price: $295.00
16 inch MX-TBARS CHROME (RG15)

Features of your 16" Westcoast-Mxtbars RG15

Fitment:
* 2015-18 ROAD GLIDES
for
2014 and earlier bikes see MX-TBARS Category
* 2018 and earlier STREET GLIDES


VERY IMPORTANT: Cable and wiring extensions will be needed for this size.

Coating: CHROME


Top Crossbar:
- 5 1/2" spread in the middle of the handlebar. Then bends and rises up 2" and then the 1-1/4" tubing is swaged (tapered) down to 1"diameter. (Fits conventional controls)
-
Both sides have 1/2" holes punched for internal wiring.
- Cross width is 31 1/2" across and pullback is 3 1/2".
- Your Wrist angle will be at a 18 degree angle Cross bar is welded to sit flat on a 28 degree rake
- The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.

The throttle side tubing at 1" is honed out and notched for fly by wire.

Risers:
3 1/2" spacing between risers. (Fits conventional top triple tree clamps). 1/2" x 5/8" oval holes are 1 7/8" up from the bottom for internal wiring.

Recommendations:
- Heavy Duty Bushings FOR ROAD GLIDE
- Grade 8 bolts
Keynote:
- These Handlebars are measured by overall height 14 inch risers with the 2 inch rise on the top cross bar equals 16 inches.
- 4 total weld points

- 2 holes will need to be made in the nacelle plastic to pass through and bolt down directly to the triple trees.
- On road glides the nipple on the underside of the vibration dampener on the inside part of the controls must be cut off to fit on our bars.

Here is RG15 Nacelle Cutout template link.CLICK HERE TO DOWNLOAD!

Our Price: $320.00