Company Info





  Home > MXTBARS > SBOB MXTBARS > 8 INCH >

8" SBOB MX-TBARS PCB
8" SBOB MX-TBARS PCB


 
Our Price: $325.00


Availability:: Usually Ships in 2 Weeks
Product Code: WCD612
Qty:

Description
 
Features of your MXTBARS 8" Risers SBOB

Metal: 1080 mild gauge steel tubing
Coating: POWDERCOAT
Color: BLACK

Internal wiring: YES

Top Crossbar: - 5 1/2" spread in the middle of the handlebar. Then bends and rises up 2" and then the 1-1/4" tubing is swaged (tapered) down to 1"diameter. (Fits conventional controls) - Both sides are dimpled with 5/8" Holes punched for internal wiring. - Cross width is 31 1/2" across and pullback is 3 1/2". - Your Wrist angle will be at a 18 degree angle Cross bar is welded to sit flat on a 28 degree rake - The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.

Risers: All cuts and holes are made by Laser cutting - 3 1/2" spacing between risers. - 1 1/4" at the top of the riser swaged (tapered) down to 1" diameter.

Original SBOB plate: 1/2" thick steel plate - The risers are pressed through the the plate at a 14 degree angle and TIG welded at the top of the plate and the bottom of the plate.

Recommendations: Grade 8 or Grade 9 (L9) bolts

Keynotes: These Handlebars are measured by overall height 6 inch risers with the 2 inch rise on the top cross bar equals 8 inches. - 6 total weld points YOUR STOCK SBOB CABLES AND WIRING WILL SWAP OVER WITHOUT HAVING TO CHANGE ANY WIRING OR CABLES.
This SBOB model is specifically made for the 2008-2012 street bob HD made with the Integrated Triple Trees. If you have a 2007 and earlier or a 2013 and later then please go back and choose the standard Mxtbars.

Share your knowledge of this product. Be the first to write a review »