|
|
|
|
|
|
8 inch 48HD TBARS RAW
|
|
|
Features of your Westcoast-Tbars 8" Risers 48HD
Metal: 1080 mild gauge steel tubing
Coating: Raw Metal
Color: N/A
Internal wiring: YES
Top Crossbar:
- 1 1/4" swaged (tapered) down to 1"diameter. (Fits conventional controls)
- Cross width is 28" across and pullback is 2 1/2".
- Your Wrist angle will be at a 16 degree angle Cross bar is welded to sit flat on a 28 degree rake
- The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.
Risers:
- All cuts and holes are made by Laser cutting
- 3 1/2" spacing between risers.
- 1 1/4" at the top of the riser swaged (tapered) down to 1" diameter.
Original 48HD Steel plate:
- 1/2" thick steel plate
- The risers are pressed through the Plate and TIG welded at the top and the bottom of the plate.
-
Keynote:
- Risers are 8" tall and the top cross bar is welded on top of riser tubes. 9" overall including top crossbar.
- 6 total weld points. NOTE: This 48HD model is specifically made for the HD SPORTSTER
made with the Integrated Triple Trees. If you have SPORTSTER with the
standard 2 hole - 3.5 inch spread triple trees then please go back and
choose the standard Tbars. YOU WILL HAVE TO EXTEND YOUR CABLES AND
WIRING. Also, the SBOB version will not work on this application.
|
|
|
|
|
|
|
|
|
|
|
8 inch 48HD TBARS POWDERCOAT BLACK
|
|
|
Features of your Westcoast-Tbars 8" Risers 48HD
Metal: 1080 mild gauge steel tubing
Coating: Powdercoated
Color: Gloss Black
*Powdercoating ends 4 inches before each side for easier installation of your controls
Internal wiring: YES
Top Crossbar:
- 1 1/4" swaged (tapered) down to 1"diameter. (Fits conventional controls)
- Cross width is 28" across and pullback is 2 1/2".
- Your Wrist angle will be at a 16 degree angle Cross bar is welded to sit flat on a 28 degree rake
- The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.
Risers:
- All cuts and holes are made by Laser cutting
- 3 1/2" spacing between risers.
- 1 1/4" at the top of the riser swaged (tapered) down to 1" diameter.
Original 48HD Steel plate:
- 1/2" thick steel plate
- The risers are pressed through the Plate and TIG welded at the top and the bottom of the plate.
-
Keynote:
- Risers are 8" tall and the top cross bar is welded on top of riser tubes. 9" overall including top crossbar.
- 6 total weld points. NOTE: This 48HD model is specifically made for the HD SPORTSTER
made with the Integrated Triple Trees. If you have SPORTSTER with the
standard 2 hole - 3.5 inch spread triple trees then please go back and
choose the standard Tbars. YOU WILL HAVE TO EXTEND YOUR CABLES AND WIRING. Also, the SBOB version will not work on this application.
|
|
|
|
