Features of your Westcoast-Tbars 14" Risers RG15
Fitment:
* 2015-2020 ROAD GLIDES
for 2014 and earlier bikes see TBARS Category
* 2018 and earlier STREET GLIDES
Recommendations:
- Bagger Heavy Duty Bushings
- Grade 8 Bolts
(GRADE 9 BOLTS are NOT compatible with 2015 road glides and newer)
VERY IMPORTANT: IF YOU HAVE ABS. YOU WILL BE ABLE TO SWAP YOUR
CURRENT CABLES AND WIRING TO THESE.
IF YOUR BIKE DO NOT HAVE ABS. YOU WILL
NEED TO EXTEND YOUR CABLES AND WIRING OR GO DOWN A SIZE TO 12".
Metal: 1080 mild gauge steel tubing with .125 wall thickness
Coating: POWDERCOAT BLACK
Top Crossbar: 1 1/4" swaged (tapered) down to 1" diameter.
Both sides have 1/2" holes punched for internal wiring. (Fits conventional
controls) - Cross width is 28" across and has a 2 1/4" pullback. The
throttle side tubing at 1" is honed out and notched for fly by wire The (2) -
3/4" holes in middle of the bar are made to be centered for the 3 1/2
spacing of the risers.
Risers: 3 1/2" spacing between risers. (Fits 2015 top triple
tree clamps). 1/2" x 5/8" oval holes are 1 7/8" up from the bottom for
internal wiring.
Keynote: Risers are 14" tall and the top cross bar is welded on
top of riser tubes. 15" overall including top crossbar. - 4 total weld
points. 2 holes will need to be made in the nacelle plastic to pass through and
bolt down directly to the triple trees. On road glides the nipple on the
underside of the vibration dampener on the inside part of the controls
must be cut off to fit on our bars.
Here is RG15 Nacelle Cutout template link.CLICK HERE TO DOWNLOAD!
