12 INCH

Company Info

Home > WCTBARS > 48HD TBARS > 12 INCH

Sort By:

Page of 1

12" 48HD TBARS RAW

Our Price: $270.00

Features of your Westcoast-Tbars 12" Risers 48HD Metal: 1080 mild gauge steel tubing Coating: Raw Metal Color: N/A Internal wiring: YES Top Crossbar: - 1 1/4" swaged (tapered) down to 1"diameter. (Fits conventional controls) - Cross width is 28" across and pullback is 2 1/2". - Your Wrist angle will be at a 16 degree angle Cross bar is welded to sit flat on a 28 degree rake - The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers. Risers: - All cuts and holes are made by Laser cutting - 3 1/2" spacing between risers. - 1 1/4" at the top of the riser swaged (tapered) down to 1" diameter. Original 48HD Steel plate: - 1/2" thick steel plate - The risers are pressed through the Plate and TIG welded at the top and the bottom of the plate. - Keynote: - Risers are 12" tall and the top cross bar is welded on top of riser tubes. 13" overall including top crossbar. - 6 total weld points. NOTE: This 48HD model is specifically made for the HD SPORTSTER made with the Integrated Triple Trees. If you have SPORTSTER with the standard 2 hole - 3.5 inch spread triple trees then please go back and choose the standard Tbars. YOU WILL HAVE TO EXTEND YOUR CABLES AND WIRING. Also, the SBOB version will not work on this application.

12" 48HD TBARS PCB

Our Price: $315.00

Features of your Westcoast-Tbars 12" Risers 48HD Metal: 1080 mild gauge steel tubing Coating: Powdercoated Color: Gloss Black *Powdercoating ends 4 inches before each side for easier installation of your controls Internal wiring: YES Top Crossbar: - 1 1/4" swaged (tapered) down to 1"diameter. (Fits conventional controls) - Cross width is 28" across and pullback is 2 1/2". - Your Wrist angle will be at a 16 degree angle Cross bar is welded to sit flat on a 28 degree rake - The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers. Risers: - All cuts and holes are made by Laser cutting - 3 1/2" spacing between risers. - 1 1/4" at the top of the riser swaged (tapered) down to 1" diameter. Original 48HD Steel plate: - 1/2" thick steel plate - The risers are pressed through the Plate and TIG welded at the top and the bottom of the plate. - Keynote: - Risers are 12" tall and the top cross bar is welded on top of riser tubes. 13" overall including top crossbar. - 6 total weld points. NOTE: This 48HD model is specifically made for the HD SPORTSTER made with the Integrated Triple Trees. If you have SPORTSTER with the standard 2 hole - 3.5 inch spread triple trees then please go back and choose the standard Tbars. YOU WILL HAVE TO EXTEND YOUR CABLES AND WIRING. Also, the SBOB version will not work on this application.