Home > OG TBARS > PULLBACK
Sort By:
Page of 1
10"  PULLBACK OG TBARS RAW 10" PULLBACK OG TBARS RAW

Features of your OG-Tbars 10" Risers

Coating
: RAW

Top Crossbar: - 1-1/4" swedged (tapered) down to 1"diameter 1080 mild gauge steel tubing. (Fits conventional controls) - Dimpled with 5/8" Holes punched for internal wiring. - Cross width is 26" across and pullback is 0". (NOT THROTTLE BY WIRE COMPATIBLE)

Risers
: Bend: 30 degrees

- 3 1/2" spacing between risers. (Fits conventional top triple tree clamps) - 5/8" oval holes at the bottom for internal wiring.

Keynote
: - Risers are 10" tall and the top cross bar is welded on top of riser tubes. - 4 weld points

Our Price: $225.00
12"  PULLBACK OG TBARS RAW 12" PULLBACK OG TBARS RAW

"Features of your OG-Tbars 10"" Risers

Coating: RAW

Top Crossbar: - 1-1/4"" swaged (tapered) down to 1""diameter 1080 mild gauge steel tubing. (Fits conventional controls) - Dimpled with 5/8"" Holes punched for internal wiring. - Cross width is 26"" across and pullback is 0"". (NOT THROTTLE BY WIRE COMPATIBLE)

Risers: Bend: 30 degrees

- 3 1/2"" spacing between risers. (Fits conventional top triple tree clamps) - 5/8"" oval holes at the bottom for internal wiring.

Keynote: - Risers are 10"" tall and the top cross bar is welded on top of riser tubes. - 4 weld points"

Our Price: $230.00
14"  PULLBACK OG TBARS RAW 14" PULLBACK OG TBARS RAW

Features of your OG-Tbars 14" Risers

Coating
: CHROME (Powdercoating ends 4" before each side for easier installation of your controls)

Top Crossbar:
- 1-1/4" swedged (tapered) down to 1"diameter 1080 mild gauge steel tubing. (Fits conventional controls) - Dimpled with 5/8" Holes punched for internal wiring. - Cross width is 26" across and pullback is 0".
(NOT THROTTLE BY WIRE COMPATIBLE)

Risers
: Bend: 30 degrees

- 3 1/2" spacing between risers. (Fits conventional top triple tree clamps) - 5/8" oval holes at the bottom for internal wiring.

Keynote
: - Risers are 14" tall and the top cross bar is welded on top of riser tubes. - 4 weld points

Our Price: $235.00
16"  PULLBACK OG TBARS RAW 16" PULLBACK OG TBARS RAW

Features of your OG-Tbars 16" Risers

Coating
: RAW

Top Crossbar: - 1-1/4" swaged (tapered) down to 1"diameter 1080 mild gauge steel tubing. (Fits conventional controls) - Dimpled with 5/8" Holes punched for internal wiring. - Cross width is 26" across and pullback is 0".
(NOT THROTTLE BY WIRE COMPATIBLE)

Risers
: Bend: 30 degrees

- 3 1/2" spacing between risers. (Fits conventional top triple tree clamps) - 5/8" oval holes at the bottom for internal wiring.

Keynote
: - Risers are 16" tall and the top cross bar is welded on top of riser tubes. - 4 weld points

Our Price: $240.00
10"  PULLBACK OG TBARS POWDERCOAT BLACK 10" PULLBACK OG TBARS POWDERCOAT BLACK

Features of your OG-Tbars 10" Risers

Coating: POWDERCOAT BLACK (Powdercoating ends 4" before each side for easier installation of your controls)

Top Crossbar: - 1-1/4" swaged (tapered) down to 1"diameter 1080 mild gauge steel tubing. (Fits conventional controls) - Dimpled with 5/8" Holes punched for internal wiring. - Cross width is 26" across and pullback is 0". (NOT THROTTLE BY WIRE COMPATIBLE)

Risers: Bend: 30 degrees

- 3 1/2" spacing between risers. (Fits conventional top triple tree clamps) - 5/8" oval holes at the bottom for internal wiring.

Keynote: - Risers are 10" tall and the top cross bar is welded on top of riser tubes. - 4 weld points

Our Price: $270.00
12"  PULLBACK OG TBARS POWDERCOAT BLACK 12" PULLBACK OG TBARS POWDERCOAT BLACK

Features of your OG-Tbars 12" Risers

Coating:
POWDERCOAT BLACK (Powdercoating ends 4" before each side for easier installation of your controls)

Top Crossbar
: - 1-1/4" swedged (tapered) down to 1"diameter 1080 mild gauge steel tubing. (Fits conventional controls) - Dimpled with 5/8" Holes punched for internal wiring. - Cross width is 26" across and pullback is 0".
(NOT THROTTLE BY WIRE COMPATIBLE)

Risers:
Bend: 30 degrees

- 3 1/2" spacing between risers. (Fits conventional top triple tree clamps) - 5/8" oval holes at the bottom for internal wiring.

Keynote:
- Risers are 12" tall and the top cross bar is welded on top of riser tubes. - 6 weld points

Our Price: $275.00
14"  PULLBACK OG TBARS POWDERCOAT BLACK 14" PULLBACK OG TBARS POWDERCOAT BLACK

Features of your OG-Tbars 14" Risers

Coating
: CHROME (Powdercoating ends 4" before each side for easier installation of your controls)

Top Crossbar: - 1-1/4" swaged (tapered) down to 1"diameter 1080 mild gauge steel tubing. (Fits conventional controls) - Dimpled with 5/8" Holes punched for internal wiring. - Cross width is 26" across and pullback is 0". (NOT THROTTLE BY WIRE COMPATIBLE)

Risers
: Bend: 30 degrees

- 3 1/2" spacing between risers. (Fits conventional top triple tree clamps) - 5/8" oval holes at the bottom for internal wiring.

Keynote
: - Risers are 14" tall and the top cross bar is welded on top of riser tubes. - 4 weld points

Our Price: $280.00
16"  PULLBACK OG TBARS POWDERCOAT BLACK 16" PULLBACK OG TBARS POWDERCOAT BLACK

Features of your OG-Tbars 16" Risers

Coating: POWDERCOAT BLACK
(Powdercoating ends 4" before each side for easier installation of your controls)
Top Crossbar:

-  1-1/4" swedged (tapered) down to 1"diameter 1080 mild gauge steel tubing. (Fits conventional controls)

-  Dimpled with 5/8" Holes punched for internal wiring.

-  Cross width is 26" across and pullback is 0".

Risers:
Bend: 30 degrees



-  3 1/2" spacing between risers. (Fits conventional top triple tree clamps)

-  5/8" oval holes at the bottom for internal wiring.

Keynote:

-  Risers are 16" tall and the top cross bar is welded on top of riser tubes.
-  4 weld points

Our Price: $285.00
10"  PULLBACK OG TBARS CHROME 10" PULLBACK OG TBARS CHROME

Features of your OG-Tbars 10" Risers

Coating: CHROME

Top Crossbar: - 1-1/4" swaged (tapered) down to 1"diameter 1080 mild gauge steel tubing. (Fits conventional controls) - Dimpled with 5/8" Holes punched for internal wiring. - Cross width is 26" across and pullback is 0". (NOT THROTTLE BY WIRE COMPATIBLE)

Risers: Bend: 30 degrees

- 3 1/2" spacing between risers. (Fits conventional top triple tree clamps) - 5/8" oval holes at the bottom for internal wiring.

Keynote: - Risers are 10" tall and the top cross bar is welded on top of riser tubes. - 4 weld points

Our Price: $295.00
12"  PULLBACK OG TBARS CHROME 12" PULLBACK OG TBARS CHROME

Features of your OG-Tbars 12" Risers

Coating: CHROME

Top Crossbar
: - 1-1/4" swedged (tapered) down to 1"diameter 1080 mild gauge steel tubing. (Fits conventional controls) - Dimpled with 5/8" Holes punched for internal wiring. - Cross width is 26" across and pullback is 0". (NOT THROTTLE BY WIRE COMPATIBLE)

Risers: Bend: 30 degrees

- 3 1/2" spacing between risers. (Fits conventional top triple tree clamps) - 5/8" oval holes at the bottom for internal wiring.

Keynote: - Risers are 12" tall and the top cross bar is welded on top of riser tubes. - 6 weld points

Our Price: $300.00
14"  PULLBACK OG TBARS CHROME 14" PULLBACK OG TBARS CHROME

Features of your OG-Tbars 14" Risers

Coating
: CHROME (Powdercoating ends 4" before each side for easier installation of your controls)

Top Crossba
r: - 1-1/4" swedged (tapered) down to 1"diameter 1080 mild gauge steel tubing. (Fits conventional controls) - Dimpled with 5/8" Holes punched for internal wiring. - Cross width is 26" across and pullback is 0". (NOT THROTTLE BY WIRE COMPATIBLE)

Risers: Bend: 30 degrees

- 3 1/2" spacing between risers. (Fits conventional top triple tree clamps) - 5/8" oval holes at the bottom for internal wiring.

Keynote: - Risers are 14" tall and the top cross bar is welded on top of riser tubes. - 4 weld points

Our Price: $305.00
16"  PULLBACK OG TBARS CHROME 16" PULLBACK OG TBARS CHROME

Features of your OG-Tbars 16" Risers

Coating
: CHROME

Top Crossbar: Bend: 30 degrees

- 1-1/4" swedged (tapered) down to 1"diameter 1080 mild gauge steel tubing. (Fits conventional controls) - Dimpled with 5/8" Holes punched for internal wiring. - Cross width is 26" across and pullback is 0". (NOT THROTTLE BY WIRE COMPATIBLE)

Risers
: - 3 1/2" spacing between risers. (Fits conventional top triple tree clamps) - 5/8" oval holes at the bottom for internal wiring.

Keynote: - Risers are 16" tall and the top cross bar is welded on top of riser tubes. - 4 weld points

Our Price: $310.00