Home > SLINGSHOT TBARS > 48HD SLINGSHOT > 10 INCH
Sort By:
Page of 1
10 inch 48HD SLINGSHOT RAW

Features of your SLINGSHOT 10" Risers 48HD

Metal: 1080 mild gauge steel tubing
Coating: Raw Metal
Color: N/A

Internal wiring: YES

Top Crossbar:
- 5 1/2" spread in the middle of the handlebar. Then bends and rises up 2" and then the 1-1/4" tubing is swaged (tapered) down to 1"diameter. (Fits conventional controls)
- Both sides are dimpled with 5/8" Holes punched for internal wiring.
- Cross width is 28" across and pullback is 3 1/2".
- Your Wrist angle will be at a 18 degree angle Cross bar is welded to sit flat on a 28 degree rake
- The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.

Risers:
- All cuts and holes are made by Laser cutting
- 3 1/2" spacing between risers.
- 1 1/4" at the top of the riser swaged (tapered) down to 1" diameter.

Original 48HD Steel plate:
- 1/2" thick steel plate
-  The risers are pressed through the Plate and TIG welded at the top and the bottom of the plate.


-    

Keynote:
- These Handlebars are measured by overall height 8 inch risers with the 2 inch rise on the top cross bar equals 10 inches.
-  6 total weld points. NOTE: This 48HD model is specifically made for the HD SPORTSTER
made with the Integrated Triple Trees. If you have SPORTSTER with the
standard 2 hole - 3.5 inch spread triple trees then please go back and
choose the standard Tbars. YOU WILL HAVE TO EXTEND YOUR CABLES AND
WIRING. Also, the SBOB version will not work on this application.

Our Price: $235.00
10 inch SBOB SLINGSHOT RAW

Features of your SLINGSHOT 10" Risers SBOB

Metal: 1080 mild gauge steel tubing
Coating: Raw Metal
Color: N/A
Internal wiring: YES

Top Crossbar: 5 1/2" spread in the middle of the handlebar. Then bends and rises up 2" and then the 1-1/4" tubing is swaged (tapered) down to 1"diameter. (Fits conventional controls) - Both sides are dimpled with 5/8" Holes punched for internal wiring. - Cross width is 28" across and pullback is 3 1/2". - Your Wrist angle will be at a 18 degree angle Cross bar is welded to sit flat on a 28 degree rake - The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.

Risers: All cuts and holes are made by Laser cutting - 3 1/2" spacing between risers. - 1 1/4" at the top of the riser swaged (tapered) down to 1" diameter.

Original SBOB plate:
1/2" thick steel plate - The risers are pressed through the the plate at a 14 degree angle and TIG welded at the top of the plate and the bottom of the plate.

Keynote: These Handlebars are measured by overall height 8 inch risers with the 2 inch rise on the top cross bar equals 10 inches. - 6 total weld points YOUR STOCK SBOB CABLES AND WIRING WILL SWAP OVER WITHOUT HAVING TO CHANGE ANY WIRING OR CABLES.
This SBOB model is specifically made for the 2008-2012 street bob HD made with the Integrated Triple Trees. If you have a 2007 and earlier or a 2013 and later then please go back and choose the standard SLINGSHOT.

Our Price: $235.00
10 inch 48HD SLINGSHOT POWDERCOAT BLACK

Features of your 10 inch 48HD SLINGSHOT

Metal: 1080 mild gauge steel tubing
Coating: Powdercoated
Color: Gloss Black
*Powdercoating ends 4 inches before each side for easier installation of your controls

Internal wiring: YES

Top Crossbar:
- 5 1/2" spread in the middle of the handlebar. Then bends and rises up 2" and then the 1-1/4" tubing is swaged (tapered) down to 1"diameter. (Fits conventional controls)
- Both sides are dimpled with 5/8" Holes punched for internal wiring.
- Cross width is 28" across and pullback is 3 1/2".
- Your Wrist angle will be at a 18 degree angle Cross bar is welded to sit flat on a 28 degree rake
- The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.

Risers:
- All cuts and holes are made by Laser cutting
- 3 1/2" spacing between risers.
- 1 1/4" at the top of the riser swaged (tapered) down to 1" diameter.

Original 48HD Steel plate:
- 1/2" thick steel plate
-  The risers are pressed through the Plate and TIG welded at the top and the bottom of the plate.


-    

Keynote:
- These Handlebars are measured by overall height 8 inch risers with the 2 inch rise on the top cross bar equals 10 inches.
-  6 total weld points. NOTE: This 48HD model is specifically made for the HD SPORTSTER
made with the Integrated Triple Trees. If you have SPORTSTER with the
standard 2 hole - 3.5 inch spread triple trees then please go back and
choose the standard Tbars. YOU WILL HAVE TO EXTEND YOUR CABLES AND
WIRING. Also, the SBOB version will not work on this application.

Our Price: $280.00
10 inch SBOB SLINGSHOT POWDERCOAT BLACK

Features of your SLINGSHOT 10" Risers SBOB

Metal: 1080 mild gauge steel tubing
Coating: POWDERCOAT
Color: BLACK
Internal wiring: YES

Top Crossbar: 5 1/2" spread in the middle of the handlebar. Then bends and rises up 2" and then the 1-1/4" tubing is swaged (tapered) down to 1"diameter. (Fits conventional controls) - Both sides are dimpled with 5/8" Holes punched for internal wiring. - Cross width is 28" across and pullback is 3 1/2". - Your Wrist angle will be at a 18 degree angle Cross bar is welded to sit flat on a 28 degree rake - The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.

Risers: All cuts and holes are made by Laser cutting - 3 1/2" spacing between risers. - 1 1/4" at the top of the riser swaged (tapered) down to 1" diameter.

Original SBOB plate:
1/2" thick steel plate - The risers are pressed through the the plate at a 14 degree angle and TIG welded at the top of the plate and the bottom of the plate.

Keynote: These Handlebars are measured by overall height 8 inch risers with the 2 inch rise on the top cross bar equals 10 inches. - 6 total weld points YOUR STOCK SBOB CABLES AND WIRING WILL SWAP OVER WITHOUT HAVING TO CHANGE ANY WIRING OR CABLES.
This SBOB model is specifically made for the 2008-2012 street bob HD made with the Integrated Triple Trees. If you have a 2007 and earlier or a 2013 and later then please go back and choose the standard SLINGSHOT.

Our Price: $280.00