Features of your Westcoast-Tbars 10" Risers RG15
Metal: 1080 mild gauge steel tubing with .125 wall thickness
Coating: CHROME Color: n/a
Top Crossbar: 1 1/4" swaged (tapered) down to 1" diameter.
Both sides have 1/2" holes punched for internal wiring. (Fits conventional
controls) - Cross width is 28" across and has a 2 1/4" pullback. The
throttle side tubing at 1" is honed out and notched for fly by wire The (2) -
3/4" holes in middle of the bar are made to be centered for the 3 1/2
spacing of the risers.
Risers: 3 1/2" spacing between risers. (Fits 2015 top triple
tree clamps). 1/2" x 5/8" oval holes are 1 7/8" up from the bottom for
Keynote: Risers are 10" tall and the top cross bar is welded on
top of riser tubes. 11" overall including top crossbar. - 4 total weld
points. 2 holes will need to be made in the nacelle plastic to pass through and bolt down directly to the triple trees. On road glides the nipple on the underside of the vibration dampener on the inside part of the controls must be cut off to fit on our bars.