Home > CLASSIC TBARS > 8 INCH >

8" WCTB RAW
8" WCTB RAW


 
Our Price: $239.99

Quantity in Stock:1

Availability:: Usually Ships in 1 to 5 Business Days
Product Code: WC111
Qty:

Description
 
Features of your 8" Westcoast-Tbars

Metal: 1080 mild gauge steel tubing
Coating:RAW METAL

*Powdercoating ends 4 inches before each side for easier installation of your controls

Top Crossbar:
- 1 1/4" swaged (tapered) down to 1"diameter. Both sides have5/8" holes are punched for internal wiring. (Fits conventional controls)
- Cross width is 28" across and pullback is 2 1/2".
- Your Wrist angle will be at a 16 degree angle Cross bar is welded to sit flat on a 28 degree rake
- The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.
- Heated grips compatible

Risers:
- All cuts and holes are made by Laser cutting
- 3 1/2" spacing between risers. (Fits conventional top triple tree clamps)
- 5/8" oval holes are 1 7/8" up from the bottom for internal wiring.

Riser Bungs:
- These bungs are designed to be a steel 1 piece, 3 tier design. First tier fits inside the 1 1/4� tubing. Second tier meets flush with the bottom of the risers and is TIG welded bonding the bung to the riser. The third tier widens to 1 1/2� and is hollowed out 1/4� deep. This eliminates the need of a traditional washer setup, the handlebar bushing fits perfectly inside the custom bung.

Recommendations:
- Heavy Duty Bushings
- Grade 8 or Grade 9 (L9) bolts

Keynote:
- Risers are 8" tall and the top cross bar is welded on top of riser tubes. 9" overall including top crossbar.
- 4 total weld points

Share your knowledge of this product. Be the first to write a review »